HT-RC260 HDMI inputs dead

I have an HT-RC260 purchased in December 2010 that has always worked great. Today, all of the HDMI inputs failed. The component inputs still work fine, but all the HDMI inputs are dead - just blue screens. Are there any steps I can take to try to fix the issue before contacting a service center?

Thanks for the help - Josh

Hi japiller,

You can try a reset of the unit to see if that resolves the issue before contacting an authorized service center. To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings.