tx-sr602 speaker issue
2 posters
Page 1 of 1
tx-sr602 speaker issue
bob savage Tue Jan 24, 2012 2:05 pm
CENTER SPEAKER ONLY SOUND ; NOT SURE IF FRONT AND BACK SPEAKERS ARE ACTIVE ; CHECKED AND FOUND NO CURRENT AT POSTS ; IS IT POSSIBLE A SIGNAL HAS TO BE SENT OR IS IT MONO ; IS A DVD MOVIE NEEDED TO ACTIVATE SPEAKERS ?
bob savage- Posts : 1
Join date : 2012-01-24
Re: tx-sr602 speaker issue
OnkyoUSA Thu Jan 26, 2012 1:47 pm
Hi Bob,
Here is what I'd like for you to try as a test: Please go to setup --> Speaker setup --> "Level calibration" and see if you get any static from the speakers you have connected. Make sure that all the speaker wires are seated firmly and the "listening mode" is set to "all ch st"... Let me know how this works?
Here is what I'd like for you to try as a test: Please go to setup --> Speaker setup --> "Level calibration" and see if you get any static from the speakers you have connected. Make sure that all the speaker wires are seated firmly and the "listening mode" is set to "all ch st"... Let me know how this works?
OnkyoUSA- Admin
- Posts : 4077
Join date : 2011-10-06
Location : New Jersey -
Similar topics» Audyssey gives only one ping of the front left speaker and error no speaker detected shows.
» TX-SR508 Front Speaker R - no sound (Not Speaker or Wires)
» Constant bass speaker hum from HTS 3400. Reconnected wires, moved speaker etc. problem not solved. Front, back and center speakers work fine.
» Onkyp TX-SR602: Optical Sound Problems
» TX-SR602 remote wont work with receiver
» TX-SR508 Front Speaker R - no sound (Not Speaker or Wires)
» Constant bass speaker hum from HTS 3400. Reconnected wires, moved speaker etc. problem not solved. Front, back and center speakers work fine.
» Onkyp TX-SR602: Optical Sound Problems
» TX-SR602 remote wont work with receiver
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|