tx-nr818: how to select the HDMI output
3 posters
Page 1 of 1
tx-nr818: how to select the HDMI output
This seems like a really stupid question, but I have read through the manual twice and have not found an answer. I want to connect my projector to one hdmi out and an LCD tv to the other. How do you switch from one output to the other? Or are they both always active?
thanks
Doug Dickerson
thanks
Doug Dickerson
bpdougd- Posts : 2
Join date : 2012-11-28
Re: tx-nr818: how to select the HDMI output
If it is the same as the TX-NR717, it should be under the "monitor out" options. On the 717, it gives you the option to output via Main, Sub, or Both. I'm at work so I'm not by my receiver and can't say exactly where, but the "monitor out" settings should be under the first or second section of the set up menu, if I'm remembering correctly.
Hastor- Posts : 29
Join date : 2012-11-26
Re: tx-nr818: how to select the HDMI output
Thanks. Found it. Too many years in the analog world. When I saw "monitor out" I immediately flashed back to the 70's, LP's, reel-to-reel tape, when "monitor out" meant listening what you just laid down on the tape.
bpdougd- Posts : 2
Join date : 2012-11-28
Re: tx-nr818: how to select the HDMI output
No problem. If you need any further assistance; please contact us via phone, email, or via our Onkyo Forum at https://onkyoproductsupport.forumotion.com/f1-welcome-to-the-onkyo-forum.
Cordially;
Forum Moderator
Cordially;
Forum Moderator
Similar topics
» HDMI sound output from TX-NR818
» TX-NR818 HDMI "no signal"
» TX-NR818 HDMI Audio Dropouts
» TX-NR818 Audio drop on HDMI->DVR
» TX-NR818 HDMI passthrough not working; no audio
» TX-NR818 HDMI "no signal"
» TX-NR818 HDMI Audio Dropouts
» TX-NR818 Audio drop on HDMI->DVR
» TX-NR818 HDMI passthrough not working; no audio
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|