Onkyo Tx-NR515 Speaker detect problem during audyssey setup

My speakers is all working fine and when i try to run Audyssey it gives me error on left speaker detect error.This is after it test it twice. Any ideas how i can rectify this?

Hi gustav,

How many speakers are you trying to hook up to the receiver?

Thank you,

Forum Moderator.

2 front 1 centre 1sub 2surround

OnkyoUSA wrote:Hi gustav,

How many speakers are you trying to hook up to the receiver?

Thank you,

Forum Moderator.

2 front,1 centre ,1 sub,2 surround

Hi gustav,

If the surround speakers are connected to the surround back terminals this error will occur. In a 5.1 setup the surrounds need to be placed in the surr Left and Right and not the Surround back Left and Right.

Thank you,

Forum Moderator.

OnkyoUSA wrote:Hi gustav,

If the surround speakers are connected to the surround back terminals this error will occur. In a 5.1 setup the surrounds need to be placed in the surr Left and Right and not the Surround back Left and Right.

Thank you,

Forum Moderator.

The surround speakers are connected to surround and not surround back.

Gustave, switch the RS with the LS on the amp. See if it fires during the test. If so, you may have a bad wire to the failing speaker ot eh speaker itself.

At least you will know.

You could also move the failing speaker to the front and the working front to the surround.

Usually the simplest test finds the best answers.

All the best,

Doug K

d6500k wrote:Gustave, switch the RS with the LS on the amp. See if it fires during the test. If so, you may have a bad wire to the failing speaker ot eh speaker itself.

At least you will know.

You could also move the failing speaker to the front and the working front to the surround.

Usually the simplest test finds the best answers.

All the best,

Doug K

Done that still the same problem

Ok i bought brand new set of speakers with same effect what now????

In regards to your issue- it would possibly be more effective to contact our Product Support Dept for further assistance with this specific issue via our phone number and hours of operation below. We would like to speak with you and work to troubleshoot and resolve your issue, with you having access to your unit, as prompt as possible. We will need to advise you while you are near the receiver and speakers.

Thank You;

Forum Moderator