TX-SR876, HDMI1 does not work
2 posters
Page 1 of 1
TX-SR876, HDMI1 does not work
Hello,
I have TX-SR876, and hdmi 1 is not working. If I plug in the same source, say blu ray player with the same hdmi cable in hdmi 2to4, the receiver recognizes the source, but in hdmi1, I just get a message " NO signal"
any help is appreciated.
thanks
I have TX-SR876, and hdmi 1 is not working. If I plug in the same source, say blu ray player with the same hdmi cable in hdmi 2to4, the receiver recognizes the source, but in hdmi1, I just get a message " NO signal"
any help is appreciated.
thanks
prk101- Posts : 3
Join date : 2012-06-20
Re: TX-SR876, HDMI1 does not work
Hi prk101,
Do you have HDMI 1 assigned to the proper input in the 876? If yes, then have you tried a reset of the receiver yet? To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings.
Do you have HDMI 1 assigned to the proper input in the 876? If yes, then have you tried a reset of the receiver yet? To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings.
Re: TX-SR876, HDMI1 does not work
thanks for quick reply,
if that does not work, any thing else I can do ?
if that does not work, any thing else I can do ?
prk101- Posts : 3
Join date : 2012-06-20
Re: TX-SR876, HDMI1 does not work
Hi prk101,
Just make sure that you have the monitor out set to the correct out after the reset. If all that still doesn't resolve after all that then I suggest it go to a service center for further evaluation or repair. Authorized service centers can be found on our main page under support.
Just make sure that you have the monitor out set to the correct out after the reset. If all that still doesn't resolve after all that then I suggest it go to a service center for further evaluation or repair. Authorized service centers can be found on our main page under support.
Re: TX-SR876, HDMI1 does not work
I reset the receiver but no luck.
I have made sure all my settings are correct and everything is back as before except hdmi1.
thanks again.
I have made sure all my settings are correct and everything is back as before except hdmi1.
thanks again.
prk101- Posts : 3
Join date : 2012-06-20
Similar topics
» tx-sr876 no audio
» TX-SR876 Video Issues
» TX-SR876: Wii/PS2 poor video
» TX-Nr3008 (No Audio) thru HDMI or any audio source
» E2 Prom Error Message On Pwr up TX-SR876
» TX-SR876 Video Issues
» TX-SR876: Wii/PS2 poor video
» TX-Nr3008 (No Audio) thru HDMI or any audio source
» E2 Prom Error Message On Pwr up TX-SR876
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|