Receiver Model TX-NR609 Help
2 posters
Page 1 of 1
Receiver Model TX-NR609 Help
What steps do you have to take to allow sound to come from the TV speakers with out the receiver being on? I have a Sharp 52" Aquos and all my components are HDMI connected. I can watch TV but no sounds comes from the TV speakers.
af0603- Posts : 1
Join date : 2012-01-28
Re: Receiver Model TX-NR609 Help
Hi af0603,
You will need to turn on the HDMI Pass Through Feature (RIHD). You will need to go into the Hardware setup menu and then go into the HDMI menu from there. All of this information can be located on page 56 of your manual. IF you do not have manual here is our blog post on how to download one: http://onkyousacustomersupportblog.wordpress.com/2011/09/13/owner%e2%80%99s-manuals/ Thank you for choosing Onkyo.
You will need to turn on the HDMI Pass Through Feature (RIHD). You will need to go into the Hardware setup menu and then go into the HDMI menu from there. All of this information can be located on page 56 of your manual. IF you do not have manual here is our blog post on how to download one: http://onkyousacustomersupportblog.wordpress.com/2011/09/13/owner%e2%80%99s-manuals/ Thank you for choosing Onkyo.
Similar topics
» Network stream stops when new zone is activated.
» AV Receiver Model HT-RC330 ONKYO HDMI connection problem
» watching TV w/out Receiver turned on NR609
» Android application connection issue with NR609
» HTIB ht-s7409 with nr609 receiver.
» AV Receiver Model HT-RC330 ONKYO HDMI connection problem
» watching TV w/out Receiver turned on NR609
» Android application connection issue with NR609
» HTIB ht-s7409 with nr609 receiver.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|