TX-SR508 HDMI no output
2 posters
Page 1 of 1
TX-SR508 HDMI no output
My TX-SR508 suddenly stopped processing the HDMI inputs. HDMI port 1, if attempted to use, will result in a black screen and the receivers OSD not working. HDMI ports 2-4, if attempted to use, will result in a blue screen with the only the OSD working. Sound no longer works on any HDMI port. I have tried resetting (TV/VCR + Standby) multiple times, with no affect. If I bypass the receiver and connect directly to my TV using the same cable, I have audio and video (through the TV).
This was a refurbished unit purchased from shoponkyo, but the warranty has expired. I've read about multiple HDMI issues with this series, and wonder if my problems are related.
Any suggestions?
This was a refurbished unit purchased from shoponkyo, but the warranty has expired. I've read about multiple HDMI issues with this series, and wonder if my problems are related.
Any suggestions?
CharleySimmons- Posts : 1
Join date : 2012-07-24
Re: TX-SR508 HDMI no output
Hi CharleySimmons,
I apologize for the delay in responding but if the reset has not resolved this issue then it may need to go to a service center for further evaluation. Authorized service centers can be found on our main page under support.
Thank you,
Forum Moderator.
I apologize for the delay in responding but if the reset has not resolved this issue then it may need to go to a service center for further evaluation. Authorized service centers can be found on our main page under support.
Thank you,
Forum Moderator.
Similar topics
» TX-SR508 Receiver - Composite to HDMI - audio but no video
» HDMI output
» HT-RC360 No HDMI Output
» When Off the NR609 Draws 35 Watts
» tx-nr818: how to select the HDMI output
» HDMI output
» HT-RC360 No HDMI Output
» When Off the NR609 Draws 35 Watts
» tx-nr818: how to select the HDMI output
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|