HELP NO AUDIO
2 posters
Page 1 of 1
HELP NO AUDIO
Have the SR-707 since June 2010. Great entertainment until earlier this month when I noticed output was was resetting to CD/TAPE when SAT/CABLE was pressed to turn on system. Now there is no audio on the system. Display is on all functions change but no audio. I've tried powering off from the outlet and a factory reset. Please help.
roille- Posts : 1
Join date : 2012-06-16
Re: HELP NO AUDIO
Hi roille,
If you go into the setup then go to "speaker setup" and then go to "level calibration" do you hear any type of static noise? If not then have you tried to reset the receiver? To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings.
If either of the above two solutions do not work then please contact our parts and service department for further instructions, they can be reached at 201-785-2600 option #4.
If you go into the setup then go to "speaker setup" and then go to "level calibration" do you hear any type of static noise? If not then have you tried to reset the receiver? To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings.
If either of the above two solutions do not work then please contact our parts and service department for further instructions, they can be reached at 201-785-2600 option #4.
Similar topics
» Onkyo tx-nr809 enabling HDMI audio out disables digital audio
» TX-SR707 No Audio Sound
» TX-Nr3008 (No Audio) thru HDMI or any audio source
» TX nr809 - No Audio after Firmware Update
» SR 707 | No Audio
» TX-SR707 No Audio Sound
» TX-Nr3008 (No Audio) thru HDMI or any audio source
» TX nr809 - No Audio after Firmware Update
» SR 707 | No Audio
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|