Speaker Impedience
2 posters
Page 1 of 1
Speaker Impedience
stephe36 Fri Nov 18, 2011 2:00 pm
Is there a minimum impedence value of speaker suggested for models TX-NR609 through TX-NR809? I have a set of Kliptch Quartets from 10 years ago and I am not certain they would work with these receiver models.
Thanks
Thanks
stephe36- Posts : 2
Join date : 2011-11-18
Re: Speaker Impedience
OnkyoUSA Fri Nov 18, 2011 3:19 pm
Hi stephe36,
The speaker Impedience should be between 6 and 16 ohms. You can find this information on the TX-NR609 product page on our website under Specifications: http://www.onkyousa.com/model.cfm?m=TX-NR609&class=Receiver&p=s
Thank you for contacting Product Support via our forum!
The speaker Impedience should be between 6 and 16 ohms. You can find this information on the TX-NR609 product page on our website under Specifications: http://www.onkyousa.com/model.cfm?m=TX-NR609&class=Receiver&p=s
Thank you for contacting Product Support via our forum!
OnkyoUSA- Admin
- Posts : 4077
Join date : 2011-10-06
Location : New Jersey -
Similar topics» Audyssey gives only one ping of the front left speaker and error no speaker detected shows.
» TX-SR508 Front Speaker R - no sound (Not Speaker or Wires)
» Constant bass speaker hum from HTS 3400. Reconnected wires, moved speaker etc. problem not solved. Front, back and center speakers work fine.
» Speaker Setup
» TX-NR609 speaker pre-out?
» TX-SR508 Front Speaker R - no sound (Not Speaker or Wires)
» Constant bass speaker hum from HTS 3400. Reconnected wires, moved speaker etc. problem not solved. Front, back and center speakers work fine.
» Speaker Setup
» TX-NR609 speaker pre-out?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|