609 zone volume left and right
2 posters
Page 1 of 1
609 zone volume left and right
everything is set up correctly just the volume in zone 2 is different in left and right speakers left goes quite loud right is barely audilble ive checked the wires changed speakers no different is the something in the settings where i can adjust the balance ?????
mike1623- Posts : 1
Join date : 2012-03-04
Re: 609 zone volume left and right
Hi mike1623,
I would try a reset of the receiver. To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings.
I would try a reset of the receiver. To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings.
Similar topics
» TX-NR 616 Zone 2 Actitvation--no sound from analog sources
» Zone 2 volume problem
» TX-NR609 zone 2 volume
» Volume Control for Zone 2 on TX-NR 616
» zone 2 in-line volume
» Zone 2 volume problem
» TX-NR609 zone 2 volume
» Volume Control for Zone 2 on TX-NR 616
» zone 2 in-line volume
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|