Workaround For No Tape Monitor Loop on TX-NR717
2 posters
Page 1 of 1
Workaround For No Tape Monitor Loop on TX-NR717
I recently purchased a TX-NR717 which does not have a tape monitor loop. I would like to add a graphic audio equalizer. Is there a workaround that would allow me to connect an equalizer?
Thanks,
Derek
Thanks,
Derek
Dubinvero- Posts : 2
Join date : 2012-11-03
I Found Workaround Solution
I think I figured out a workaround solution to use a graphic equalizer with the TX-NR717. The solution is to use Zone 2 or Zone 3 out to drive the speakers. Connect Pre-out Main to graphic equalizer. Connect output of graphic equalizer to one of the analog audio line inputs. Use remote to select line source for Zone 2. I have not implemented this but based upon the description of Zone play in the users manual it should work. One drawback is that extra buttons need to be pressed on the Onkyo remote to play the equalizer source in Zone 2 or 3. If I decide to add an equalizer I would program macros for zone2/3 control into my smart remote.
Derek
Derek
Dubinvero- Posts : 2
Join date : 2012-11-03
Re: Workaround For No Tape Monitor Loop on TX-NR717
Glad to read this has been resolved by self-resolvement. If you have any more questions or concerns , Please contact our Product Support Dept for further assistance with this specific issue via our phone number and hours of operation (Monday - Sunday 24 hours a day: (800) 229-1687; option #3 PRODUCT SUPPORT). We would like to speak with you and work to troubleshoot and resolve your issue as prompt as possible.
Cordially;
Forum Moderator
Cordially;
Forum Moderator
Similar topics
» Alternative for Tape Monitor Loop on TX-NR616
» TX-NR717 Persistent DNS error during firmware update - workaround
» Audyssey stays in calculating loop... (TXNR-3009)
» Receiver TX-SR 805 locked and scrolling through all listening modes in a loop
» Onkyo Receiver with Tape I/O Ports
» TX-NR717 Persistent DNS error during firmware update - workaround
» Audyssey stays in calculating loop... (TXNR-3009)
» Receiver TX-SR 805 locked and scrolling through all listening modes in a loop
» Onkyo Receiver with Tape I/O Ports
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum