Connecting PC via RCA analog

I tried connecting my PC via Xonar DX soundcard to the TX-RS805 receiver but i get no sound. I use 3x 1/8 to RCA wires for front, side and center speakers. I tried connecting them to 3 analog inputs wich are Aux1, Game/TV and VCR (every channel is set to Analog) then choosing the Aux1 channel. I also tried connecting them to the Multi-Channel input, setting Multich to Aux1.

I did several tests but I get no sound. I get sound from other devices but my PC keeps making me crazy...

Thank you

Hi toxsick,
Please try changing the remote control to "multi-channel". This can be found on page 70 of the manual. If you do not have a manual you can download one on our website. To find out how please view our blog post: http://onkyousacustomersupportblog.wordpress.com/2011/09/13/owner%e2%80%99s-manuals/ Thank you!

It is actually set to ''multi-channel''. On ''Analog'', the front panel indicates that only 2 speakers (left and right fronts) are selected. On ''multi-channel'', the pannel shows 6 speakers and the listening mode is set to ''Direct''. I still get no sound.

Thank you again.

Hi toxsick,
Please make sure you have checked all your connections (speaker and input). If everything is set correctly the next thinng I can suggest that you do is a Factory Reset. There is some important information you must know before performing a reset. Please view it here on our blog: http://onkyousacustomersupportblog.wordpress.com/2011/09/12/factory-reset/ This post also gives you instructions on how to perform the reset. If you are still having problems after performing the reset please contact us at product support: 1-800-229-1687 M-F 9am-8pm | Sat-Sun 10am-8pm ET