No digital audio on TX-NR509
2 posters
Page 1 of 1
No digital audio on TX-NR509
Hello - i've updated the firmware (to 108110000000103), and reset the receiver following the instructions i found here in the forum, yet still no go with the digital (optical) audio. It used to work, and i'm not sure if the latest update broke it, or if it was something else. Any tips on what I can do?
I have an optical audio cord plugged into Optical Input 2 (i've also tried it going into optical input 1), and have set TV/CD to use optical input 2 (as it used to work this way) - but no sound, and the display on the unit reads "Analog". plz help. thanks for your time!
I have an optical audio cord plugged into Optical Input 2 (i've also tried it going into optical input 1), and have set TV/CD to use optical input 2 (as it used to work this way) - but no sound, and the display on the unit reads "Analog". plz help. thanks for your time!
jz510- Posts : 1
Join date : 2012-07-24
Re: No digital audio on TX-NR509
Hi jz510,
The reset should of corrected this and if that has not corrected the issue then I would suggest having a service center further evaluate it. Authorized service centers can be found on our main page under support.
Thank you,
Forum Moderator.
The reset should of corrected this and if that has not corrected the issue then I would suggest having a service center further evaluate it. Authorized service centers can be found on our main page under support.
Thank you,
Forum Moderator.
Similar topics
» Onkyo tx-nr809 enabling HDMI audio out disables digital audio
» no digital sound from USB and Univ.port on TX-NR509
» No digital audio output on NR-807
» hdmi vs digital optical audio
» TX-NR609 digital audio drop outs
» no digital sound from USB and Univ.port on TX-NR509
» No digital audio output on NR-807
» hdmi vs digital optical audio
» TX-NR609 digital audio drop outs
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|