tx-sr605 OSD working only intermittently

Hi, I am finding that the OSD shows only occasionally on my Panasonic HDTV over HDMI. Sometimes it will flash on momentarily before the screen goes black.

The display on the sr605 itself properly displays the setup menus, but the passthru of this setup OSD does not seem to be working consistently.

Are there any settings or connections I can check?

Thanks!
rocketwils

Hi Rocketwils,

Have you tried new cables? If you have and it still doing the same thing try a reset of the unit. To do the reset please follow these instructions:

To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode. PLEASE UNDERSTAND THAT YOU WILL LOSE ALL YOUR AUDIO & VIDEO ASSIGNMENTS ON THE RECEIVER PLUS YOU WILL LOSE ALL YOUR SPEAKER CONFIGURATIONS, SPEAKER DISTANCE AND ALL LEVEL CALIBRATION SETTINGS. YOU WILL ALSO LOSE ANY PROGRAMMED RADIO STATIONS IN MEMORY. Once the receiver goes into standby mode turn it back on and go thru the setup menu for all custom settings.