TX-LR552 (I know, she's old) - Does Component in and Out support HD?
2 posters
Page 1 of 1
TX-LR552 (I know, she's old) - Does Component in and Out support HD?
The parent's setup is a TX-LR552 and they now have a HD TV. Was hoping to run cable (and other devices) into TX-LR552 via Component and out to TV via Component since that's all TX-LR552 has...but will the HD in and Out be the same quality? I know I could split the audio to the receiver and video direct to the TV...but these are my parents and that's just toooo many buttons to push to get things to work. THANKS A TON!! Oh yeah, I'm asking because I don't want to tear apart their monolith cabinet to re-wire everything just to strike out. Thanks for hopefully saving me a bunch of time. Happy Thanksgiving!
MM
MM
mpxmannjr- Posts : 2
Join date : 2012-11-21
Re: TX-LR552 (I know, she's old) - Does Component in and Out support HD?
"from the manual"HDTV capable (50 MHz) component video switching
(2 inputs/1 output)
http://www.retrevo.com/support/Onkyo-TX-LR552-Receivers-manual/id/365dj198/t/2/
1080i as that's tops for component output but it should work just fine!
Doug k
And that's why it's called Thanksgiving...or something.
Yep, right there on page 4 of the manual. Arrrgh. And I thought my mom had issues switching components and inputs. Thanks a ton, preeeeciate it.
mpxmannjr- Posts : 2
Join date : 2012-11-21
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|