Connecting component input projector to TX-NR616

View previous topic View next topic Go down

Connecting component input projector to TX-NR616

Post  smunday1 on Mon Oct 22, 2012 5:08 pm

I have a home cinema system that uses component in video input to projector and I would like to upgrade my AV amp to a TX-NR616 receiver.
Would I be able to have HDMI inputs from PS3 and Blu-ray into TX-NR616 and have an output via HDMI to TV and component output to projector at the same time?
Any advice or suggestions would be most welcome. Thanks

smunday1

Posts : 1
Join date : 2012-10-22

View user profile

Back to top Go down

Re: Connecting component input projector to TX-NR616

Post  OnkyoUSA on Tue Oct 23, 2012 3:27 pm

Unfortunately; this will NOT be optional on the TX-NR 616 receiver- as using RCA COMPOSITE and/or COMPONENT VIDEO cables into the receiver and trying to go out of the receiver via HDMI will require the incoming nn-HDMI conection/source to be inputted into the receiver via 480i video signal. If you try using this connection and trying to get a 1080i or 1080p video signal via the COMPONENT video connection- it will not broadcast this signal. Both the TX-NR 515 and NR 616 receivers requires this configuration; unlike the TX-NR 717 and above receiver that can automatically upconvert and output via COMPONENT and HDMI connections.

If you have any more questions or concerns, Please contact our Product Support Dept for further assistance with this specific issue via our phone number and hours of operation (800-229-1687; option #3 PRODUCT SUPPORT 24 hours a day). We would like to speak with you and work to troubleshoot and resolve your issue as prompt as possible.

Thank You;

Forum Moderator
avatar
OnkyoUSA
Admin

Posts : 4077
Join date : 2011-10-06
Location : New Jersey

View user profile http://onkyoproductsupport.forumotion.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum