Normal Volume?
2 posters
Page 1 of 1
Normal Volume?
Hi
It would be really intresting to here from som other onkyo 616 owners about the volume. It seems to be a bit low Volume ( or I´m I just fooled by the volume numbers in other recivers/TVs). I have to turn it up to approx 40 its for normal viewing in Dolby PLII Movie 5.1 ch in STB. Same with music Spotify/FLAC/mp3 320? All speakers (KEF 3005SE) are set to normal (0) and no strange settings?
What is your experince?
It would be really intresting to here from som other onkyo 616 owners about the volume. It seems to be a bit low Volume ( or I´m I just fooled by the volume numbers in other recivers/TVs). I have to turn it up to approx 40 its for normal viewing in Dolby PLII Movie 5.1 ch in STB. Same with music Spotify/FLAC/mp3 320? All speakers (KEF 3005SE) are set to normal (0) and no strange settings?
What is your experince?
Puh- Posts : 4
Join date : 2012-10-15
Re: Normal Volume?
Have you gone into the SETUP menu of the receiver and activated the INTELLIVOLUME function for both the preferred inputs? You can raise the volume of these inputs up to 12 db higher than normal output to compensate for the current volume setting being distributed from your receiver. Go into the SOURCE SETUP submenu and scroll down to the INTELLIVOLUME option and raise the db level for your preferred setting.
With Intellivolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others. Use the Left and Right arrow buttons to set the level. If a component is noticeably louder than the others, use the Left arrow button to reduce its input level. If it’s noticeably quieter, use the Right arrow button to increase its input level. The input level can be adjusted from −12 dB to +12 dB in 1 dB steps. Note: Intellivolume does not apply for Zone 2.
If you have any more questions or concerns, Please contact our Product Support Dept for further assistance with this specific issue via our phone number and hours of operation (800-229-1687; option #3 PRODUCT SUPPORT 24 hours a day). We would like to speak with you and work to troubleshoot and resolve your issue as prompt as possible.
Thank You;
Forum Moderator
With Intellivolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others. Use the Left and Right arrow buttons to set the level. If a component is noticeably louder than the others, use the Left arrow button to reduce its input level. If it’s noticeably quieter, use the Right arrow button to increase its input level. The input level can be adjusted from −12 dB to +12 dB in 1 dB steps. Note: Intellivolume does not apply for Zone 2.
If you have any more questions or concerns, Please contact our Product Support Dept for further assistance with this specific issue via our phone number and hours of operation (800-229-1687; option #3 PRODUCT SUPPORT 24 hours a day). We would like to speak with you and work to troubleshoot and resolve your issue as prompt as possible.
Thank You;
Forum Moderator
Similar topics
» Onkyo TX-NR609 optical sound to normal SKy + box problem
» TX-NR616 - sound from speaker issues
» HDMI sound output from TX-NR818
» volume on tx nr609
» TX-NR 616 Zone 2 Actitvation--no sound from analog sources
» TX-NR616 - sound from speaker issues
» HDMI sound output from TX-NR818
» volume on tx nr609
» TX-NR 616 Zone 2 Actitvation--no sound from analog sources
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|