No HDMI Priority setting available for HDMI Main & Sub for TX-NR5010

View previous topic View next topic Go down

No HDMI Priority setting available for HDMI Main & Sub for TX-NR5010

Post  WCH on Fri Sep 21, 2012 1:52 am

Just received a 5010 to replace my 5007. I find out that 5010 doesn't offer priority setting on HDMI output main and HDMI output sub anymore. My TV doesn't support deep color while my projector does. When connecting both devices to 5010, the receiver doesn't send out 36 bit signal to my projector even with the TV turned off. (5007 will send 36 bit signal to projector when I set it as first priority.). Any advise? Is there anyway to get around this problem? Is Onkyo able to make this setting available via firmware update? I see this setting is also available on 5009 manuel that share the same video chipset as 5010.

WCH

Posts : 3
Join date : 2012-08-23

View user profile

Back to top Go down

Re: No HDMI Priority setting available for HDMI Main & Sub for TX-NR5010

Post  OnkyoUSA on Fri Sep 21, 2012 4:16 pm

Correct- this option has been removed from the 2012 models- where you previously had the option to select the following:

- BOTH (HDMI MAIN- as the priority)
- BOTH (HDMI SUB- as the priority)

Although the video chipset mirrors many features found with the 2011 models; this feature has been removed from the HDMI configuration of the receiver for the 2012 product line. Your message has been forwarded to the appropriate representatives and department for further review and research. Thank you again for your input; as someone from the Engineering department will research your suggestion.

Cordially;

Forum Moderator
avatar
OnkyoUSA
Admin

Posts : 4077
Join date : 2011-10-06
Location : New Jersey

View user profile http://onkyoproductsupport.forumotion.com

Back to top Go down

Re: No HDMI Priority setting available for HDMI Main & Sub for TX-NR5010

Post  WCH on Fri Sep 21, 2012 7:56 pm

Is there anyway to get the maximum resolution supported for each displays? Please advise..


WCH

Posts : 3
Join date : 2012-08-23

View user profile

Back to top Go down

Re: No HDMI Priority setting available for HDMI Main & Sub for TX-NR5010

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum