ARC and RIHD not working on TX-NR1009

View previous topic View next topic Go down

ARC and RIHD not working on TX-NR1009

Post  DCblackhole on Mon Sep 10, 2012 2:20 am

I just purchased a Panasonic TC-P65ST50 smart tv that supports RIHD and ARC, but I cannot get either feature to function with my TX-NR1009. I have verified all the settings with my tv and receiver, but I get no sound or HDMI control. What could be the problem? I have also tried multiple HDMI cables so I know the cable is not problem.

DCblackhole

Posts : 4
Join date : 2012-09-10

View user profile

Back to top Go down

Re: ARC and RIHD not working on TX-NR1009

Post  OnkyoUSA on Mon Sep 10, 2012 1:13 pm

In regards to your issue- it would possibly be more effective to contact our Product Support Dept for further assistance with this specific issue via our phone number and hours of operation below. We would like to speak with you and work to troubleshoot and resolve your issue, with you having access to your unit, as prompt as possible.

800-229-1687
Mon. to Fri. 9am to 8pm
Sat. and Sun. 10am to 4pm eastern std. time

Thanks,

Forum Modarator
avatar
OnkyoUSA
Admin

Posts : 4077
Join date : 2011-10-06
Location : New Jersey

View user profile http://onkyoproductsupport.forumotion.com

Back to top Go down

Re: ARC and RIHD not working on TX-NR1009

Post  DCblackhole on Mon Sep 10, 2012 10:25 pm

I contacted tech support but they just confirm everything was set correctly, but we still could not get ARC or RIHD functioning. Does your company keep a test model of each receiver that someone can test and ensure ARC is functioning and there is not a firmware issue? I also spoke with Panasonic tech support and they confirmed all my settings for the TV are correct as well.
So now I'm to the point that either my receiver or TV has a defect. I think it has to be something wrong with the receiver because I couldn't get RIHD control to work on my Toshiba LCD that I just replaced either.

DCblackhole

Posts : 4
Join date : 2012-09-10

View user profile

Back to top Go down

Re: ARC and RIHD not working on TX-NR1009

Post  DCblackhole on Tue Sep 11, 2012 11:28 am

I was able to get the ARC and RIHD working. After doing both a soft reset and a hard reset, it was still not working. I then decided to unplug all other HDMI inputs, then power cycled the television and receiver. After pressing the power button on the television remote, the tv AND receiver powered up. Just an FYI for your tech support team if anyone else runs into this issue. The only devices connected via HDMI to the receiver were an XBOX 360 and a Samsund digital cable box (from Time Warner). I'm not sure which device was causing the issue, but apparently it was one of those.

Thanks.

DCblackhole

Posts : 4
Join date : 2012-09-10

View user profile

Back to top Go down

Re: ARC and RIHD not working on TX-NR1009

Post  OnkyoUSA on Tue Sep 18, 2012 7:55 pm

Glad to read this has been resolved by our Product Support department. If you have any more questions or concerns , Please contact our Product Support Dept for further assistance with this specific issue via our phone number and hours of operation (Monday- Friday 9am to 8pm EST/ Saturday- Sunday 10am to 4pm EST: (800) 229-1687; option #3 PRODUCT SUPPORT). We would like to speak with you and work to troubleshoot and resolve your issue as prompt as possible.

Cordially;

Forum Moderator
avatar
OnkyoUSA
Admin

Posts : 4077
Join date : 2011-10-06
Location : New Jersey

View user profile http://onkyoproductsupport.forumotion.com

Back to top Go down

Re: ARC and RIHD not working on TX-NR1009

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum