TX-NR616 ZONE 2 EQ ?
2 posters
Page 1 of 1
TX-NR616 ZONE 2 EQ ?
Hello,
I'm searching for a while how to enable the equalizer for the zone 2...
I've super great speakers but the sound seems to be flat.
Is there a way to eq those speakers like the "normal" speakers ?
Thank's a lot !!!
I'm searching for a while how to enable the equalizer for the zone 2...
I've super great speakers but the sound seems to be flat.
Is there a way to eq those speakers like the "normal" speakers ?
Thank's a lot !!!
Mayo7700- Posts : 3
Join date : 2012-08-08
Re: TX-NR616 ZONE 2 EQ ?
Unfortunately; this is not an optional feature on the TX-NR 609 for POWERED ZONE 2. You can only accomplish this by utilizing the ZONE 2 LINE OUT terminal and equalizing the ZONE 2 speakers to the external amplifier/ speaker selector module (being it is equipped with a equalizer) and connect your speakers for ZONE 2 onto that external amplifier. If you have any more questions or concerns , Please contact our Product Support Dept for further assistance with this specific issue via our phone number and hours of operation (Monday- Friday 9am- 8pm/ Saturdays and Sundays 10am- 4pm EST). We would like to speak with you and work to troubleshoot and resolve your issue as prompt as possible.
Thank You;
Forum Moderator
Thank You;
Forum Moderator
Re: TX-NR616 ZONE 2 EQ ?
Thank you !
Can you tell me if these feature will be added on a new firmware ?
It's a must be feature and I think that I'm not the only one thinking that.
Buying a 650 € amp whitout this feature is really disturbing for me
Can you tell me if these feature will be added on a new firmware ?
It's a must be feature and I think that I'm not the only one thinking that.
Buying a 650 € amp whitout this feature is really disturbing for me
Mayo7700- Posts : 3
Join date : 2012-08-08
Re: TX-NR616 ZONE 2 EQ ?
Your message has been forwarded to the appropriate representatives and department for further review and research. Thank you again for your input; as someone from the Engineering department will research your suggestion.
Cordially;
Forum Moderator
Cordially;
Forum Moderator
Similar topics
» NR616 "headless" and second zone
» TX-NR616 "Zone 2 Not Active"
» TX-NR616 Audio Adjustments for Zone 2?
» tx-nr616 Zone 2 same source issue
» dlna file selection on zone 2 causing zone 1 monitor output to change
» TX-NR616 "Zone 2 Not Active"
» TX-NR616 Audio Adjustments for Zone 2?
» tx-nr616 Zone 2 same source issue
» dlna file selection on zone 2 causing zone 1 monitor output to change
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|